Antiseptic wooden flowerpots are now widely used in some garden attractions. Now the manufacturers of antiseptic wooden flowerpots in Jinan, Shandong Province, summarize the matters needing attention in selecting antiseptic wooden flowerpots for purchasers. I hope you like them.

1、注意材質。防腐木是直接選用實木加工而成的，所以實木的材質會直接影響防腐木花盆的質量。一般以俄羅斯樟子松和北歐赤松為，這兩種木材加工而成的防腐木防腐、防蟲、防真菌的效果都非常好，而且可直接應用于水體或者是土壤中，不變形、不翹曲，經久耐用。所以在挑選防腐木花盆時，這兩種材質為。

1. Pay attention to material quality. Antiseptic wood is directly processed from solid wood, so the material of solid wood will directly affect the quality of antiseptic wood flowerpots. Generally, Pinus sylvestris var. mongolica and Pinus sylvestris var. koraiensis are preferred. The wood processed from these two kinds of wood has very good effects of antisepsis, insect control and fungus control, and can be directly applied to water or soil, without distortion, warping and durability. Therefore, in the selection of preservative wood flowerpots, these two materials are the first choice.

2、注意厚度。厚度是很多人在挑選防腐木花盆時容易忽略的一點。而事實上，防腐木花盆的厚度會直接影響到價格以及使用時間。一般常見的防腐木花盆厚度以1.2公分以及1.5公分的為常見，使用為廣泛。當然，也有2公分厚的大型防腐木花盆，耐用性更好，而且質量高，價格也比較貴。

2. Pay attention to thickness. Thickness is one of the most easily overlooked points in choosing preservative wood flowerpots. In fact, the thickness of the anti-corrosive wood flowerpot will directly affect the price and use time. The thickness of the common anti-corrosive wood flowerpot is 1.2 cm and 1.5 cm, which are the most common and widely used. Of course, there are also large anti-corrosive wooden flowerpots 2 cm thick, which have better durability, high quality and high price.

3、注意防腐處理效果。想要挑選到質量上乘的防腐木花盆，就必須要注意檢查花盆的防腐工藝。檢查防腐木花盆的防腐工藝可從兩個方面入手，一是直接觀察表面的光潔度，因為防腐劑都是人工添加的，如果工藝處理不好，表面很容易殘留粉末狀雜質或者顏色不均勻，防腐效果比較差。二是檢查防腐藥劑的滲入深度，可直接將防腐木劈開查看藥劑滲入的情況，一般質優產品藥劑可直達木材中心，即便沒有到達中心，滲入厚度也要超過1厘米左右才能起到很好的防腐效果。

3. Pay attention to the effect of anti-corrosion treatment. If you want to select the best quality anti-corrosion wooden flowerpot, you must pay attention to check the anti-corrosion technology of the flowerpot. Checking the anti-corrosion technology of the anti-corrosion wooden flowerpot can start from two aspects. One is to observe the surface cleanliness directly, because the preservatives are added artificially. If the process is not handled properly, the surface is easy to remain powder impurities or uneven color, and the anti-corrosion effect is poor. The second is to check the penetration depth of antiseptics, which can directly split the wood to check the penetration of antiseptics. Generally, high-quality products can reach the center of the wood directly. Even if they do not reach the center, the penetration thickness should be more than 1 cm or so to achieve good antiseptic effect.

以上的精彩內容由山東濟南防腐木花盆的小編整理提供，假如大家想了解更多的相關信息，可以收藏我們的官網：http://www.missoularedtape.com！謝謝大家的支持！

The above wonderful content is provided by the small arrangement of anti-corrosive wood flowerpots in Jinan, Shandong Province. If you want to know more about it, you can collect our official website: http://www.missoularedtape.com! Thank you for your support!