大家都知道防腐木有價格高也有價格低的，影響價格的主要的因數防腐木的質量，好的質量價格高，質量低的價格低，那是什么因素造成防腐木的質量問題。
We all know that antiseptic wood has both high price and low price. The main factors that affect the price are the quality of antiseptic wood, good quality and high price, and low quality and low price. What causes the quality problems of antiseptic wood.
一直在和含水量“爭斗”
Always fighting with water content
一.我們肯定是需要知道，其實想要保證防腐木的質量，我們肯定是需要一直和防腐木內部含水量工作的。一般來說防腐木可能會出現變形和開裂的現象，而我們知道，之所以防腐木會變形和開裂，主要還是因為防腐木內部含水量在短時間之內有比較大的變化，進而出現了這種情況。
1、 We need to know that, in fact, to ensure the quality of anti-corrosion wood, we must always work with the internal moisture content of anti-corrosion wood. Generally speaking, the anti-corrosion wood may be deformed and cracked, and we know that the main reason why the anti-corrosion wood will be deformed and cracked is that the internal moisture content of the anti-corrosion wood changes greatly in a short period of time, and then this situation occurs.
二.我們肯定是要防蟲的，避免防腐木被蟲蛀，而如果防腐木內部含水量比較大，就會讓防腐木內部存在微生物生存的環境，這肯定也會對防腐木的質量有所影響。
2、 We must be insect proof to avoid the moth eaten wood. If the water content in the wood is large, there will be a living environment for microorganisms in the wood, which will certainly affect the quality of the wood.
導致防腐木內部含水量變化的原因都有哪些
What are the reasons for the change of water content in the anticorrosive wood
當然我們肯定還是要知道，究竟是什么樣的原因才導致防腐木含水量出現變化的，究 竟是什么樣的原因呢?
Of course, we still need to know what causes the change of moisture content of antiseptic wood and what causes it?
1、外部的保護工作沒有做好。含水量變化在很大程度上其實是因為防腐木外部保護工作沒做好，讓外部環境影響了防腐木的質量。表面的保護層是會隨著時間的的推移而有所磨損的，所以定時的檢查和修補工作肯定是不能少的。
1. External protection was not done well. To a large extent, the change of water content is actually due to the failure of external protection of anti-corrosion wood, which makes the external environment affect the quality of anti-corrosion wood. The protective layer of the surface will be worn with the passage of time, so regular inspection and repair work must be indispensable.
2、要注意到防腐木本身的含水量。一般來說處理之后的防腐木內部含水量是比較少的，此時肯定要讓防腐木內部的含水量和環境平衡，之后做好保護，如果在水分還非常多的時候就做建設，可能建設一段時間之后就因為內部含水量的問題而導致防腐木出現變形和開裂的現象。
2. Note the moisture content of the preservative wood itself. Generally speaking, the internal moisture content of the treated anti-corrosion wood is relatively small. At this time, it is necessary to balance the internal moisture content and the environment of the anti-corrosion wood, and then do a good job of protection. If the construction is carried out when the moisture is still very much, it may cause deformation and cracking of the anti-corrosion wood due to the internal moisture content problem after a period of construction.
我們肯定要關注到防腐木的含水量問題，因為從當前的情況來看，如果含水量出現了問題，這就可能會導致防腐木質量出現問題，影響我們建設的質量。
We must pay attention to the water content of anti-corrosion wood, because from the current situation, if there is a problem in the water content, it may cause problems in the quality of anti-corrosion wood and affect the quality of our construction.
傳真：0531-86370030
