防腐木是選用防腐劑滲透并固化木材后，使得木材具備了防腐的特點，而防腐木怎么油漆的工藝步驟一直是消費者備受困擾的事，與此同時大家對油漆的選擇都不了解，那么防腐木怎么刷油漆呢？
Antiseptic wood is the choice of preservatives to penetrate and solidify wood, which makes wood have the characteristics of antisepsis. How to paint antiseptic wood is always a problem for consumers. At the same time, we don't know the choice of paint, so how to paint antiseptic wood?
1.須在8℃之上的氣溫下進行加工。
1. It must be processed at the temperature above 8 ℃.
2.木料需要干燥，含水率不超過15%。
2. The wood should be dried, and the moisture content should not exceed 15%.
3.涂木蠟油前須將木材表面用細砂布打磨，并擦凈至表面光滑。木材表面若有纖維，可以用木砂紙P240或之上輕輕地砂光。
3. Before applying wood wax oil, the surface of wood shall be polished with fine abrasive cloth and cleaned until the surface is smooth. If there is fiber on the surface of wood, it can be gently sanded with wood sandpaper P240 or above.
4.應用前充分攪拌均勻，不需要稀釋；若產品粘度偏高，也可兌入少許專用稀釋劑，加入量不宜超過10%。
4. Before application, stir well without dilution; if the viscosity of the product is high, add a little special diluent, and the amount should not exceed 10%.
5.刷涂需應用軟棕毛刷，沿木材紋理方向均勻、薄薄地刷一遍，刷完后去除多余木蠟油，涂刷量一定要少，不可以涂的過厚；待表面實干后，對被涂物輕輕打磨、擦凈，12小時候可涂第二遍。
5. The soft brown brush should be applied to brush the wood evenly and thinly along the direction of wood texture. After brushing, the surplus wood wax oil should be removed. The amount of brushing must be small and not too thick. After the surface is dry, the coated material should be polished and cleaned gently, and the second time can be applied after 12 hours.
6.擦涂前，先將無塵布浸潤均勻，將過多的蠟油擠出一部份；擦涂時用勁要均勻，不可以用勁過重或過輕，先順被涂物表面橫豎交替各擦幾次。
6. Before wiping, soak the dust-free cloth evenly and squeeze out part of the excessive wax oil. When wiping, the force should be uniform, not too heavy or too light. First, wipe the dust-free cloth horizontally and vertically alternately along the surface of the coating for several times.
傳真：0531-86370030
