There are two advantages of painting antiseptic wood pavilions. One is beautiful (although the wood itself is beautiful), but it can effectively maintain the antiseptic wood pavilions. Outdoor pavilion will use paint during maintenance, so what kind of paint is good? Anticorrosive wood Pavilion manufacturers will answer for you. Determine what kind of wood it is. If anticorrosive wood is not brushed and its color is solid wood nature, varnish can be used directly. Other anticorrosive wood paints have many colors, such as California red, rust red, brown black and so on. In addition, there are also several points to pay attention to when building anticorrosive wood Pavilion

濟南防腐木涼亭

Jinan antiseptic wood Pavilion

1.用軟棕毛刷沿木材紋路方向薄薄的均勻的進行涂刷，刷完后去除剩余木蠟油，涂刷量一定要少，不可涂的過厚；待表面實干后，對被涂物悄然打磨、擦凈，12小時分可涂第二遍。

1. Use a soft brown hair brush to brush along the direction of wood grain thinly and evenly. After brushing, remove the remaining wood wax oil. The amount of brushing must be small and not too thick; After the surface is dry, polish and wipe the coating quietly, and apply it for the second time in 12 hours.

2..須在8℃以上的氣溫下進行加工。

2. It must be processed at the temperature above 8 ℃.

3.涂木蠟油前須將防腐木材表面用細砂布打磨，并擦凈至表面潤滑。木材表面如有纖維，可用木砂紙P240或以上悄然地砂光。

3. Before applying wood wax oil, the surface of anticorrosive wood shall be polished with fine abrasive cloth and cleaned until the surface is lubricated. If there is fiber on the surface of wood, it can be sanded quietly with wood sandpaper P240 or above.

4.擦涂前，先將無塵布浸潤均勻，將過多的蠟油擠出一部份；擦涂時用力要均勻，不可用力過重或過輕，先順被涂物表面反正替換各擦幾回，終究收尾時順木紋方向勻擦，使木蠟油充分進入木紋內，靜置晾干；待表面實干后，在被涂物表面悄然打磨、擦凈，同上進程再操作一次。

4. Before wiping, soak the dust-free cloth evenly and squeeze out part of the excessive wax oil; When wiping, the force should be even, not too heavy or too light. First, wipe several times along the surface of the coating, and finally wipe evenly along the grain direction, so that the wax oil can fully enter the grain, and let it stand and dry; After the surface is dry, quietly polish and wipe the surface of the coating, and operate again in the same process.