With the increasing demand for anti-corrosion wood, the problems arising from anti-corrosion wood appear, such as anti-corrosion wood is more likely to crack than other wood. Why anti-corrosion wood cracking has been the most distressing problem for people. Many people will feel more distressed because they don't know the relevant knowledge. In fact, these are normal conditions. As long as simple methods and daily simple nursing can be effectively avoided, Jinan anti-corrosion wood manufacturers will explain it to you.

事實上，木材開裂屬于正?，F象，任何的木材都會開裂，這是我們避免不了的，因為木材本身就很容易隨著環境的變化而變化，所以出現開裂的現象也就不足為奇了。而防腐木就是一個例子，由于木材在防腐加工處理的過程中會注入大量防腐藥液，無法給防腐木足夠的風干時間，因此防腐木在使用過程中表面會流失水分，導致防腐木材水分不平衡，內外張力不均勻，出現變形、開裂等現象。

In fact, wood cracking is a normal phenomenon, any wood will crack, which we can not avoid, because the wood itself is easy to change with the change of the environment, so it is not surprising that the phenomenon of cracking occurs. The anticorrosive wood is an example. Because a large amount of antiseptic solution will be injected into the wood during the process of anti-corrosion processing, it can not give the anti-corrosion wood enough air drying time, so the surface of the anti-corrosion wood will lose water during the use, resulting in the uneven moisture, uneven internal and external tension, deformation and cracking of the anticorrosive wood.

想要避免防腐木開裂的現象，我們需要前期處理和后期維護，在前期處理中，我們可以給木材足夠的風干時間，或者用烘干窯進行烘干處理，降低木材的含水率，此種方法可大大降低木材開裂的幾率，但是，木材生產周期較長，成本較高。

In order to avoid the cracking of anticorrosive wood, we need the pre treatment and later maintenance. In the early treatment, we can give the wood enough air drying time, or dry it with a drying kiln to reduce the moisture content of the wood. This method can greatly reduce the probability of wood cracking, but the wood production cycle is long and the cost is high.

在防腐木制品制作好后，應及時涂刷木油，保持水分。在后期維護中，尤其是對于戶外的防腐木制品，它們常年經受風吹、日曬、雨淋，更容易出現開裂、變形的問題，這就需要我們的隨時觀察與及時維護，在出現開裂問題的時候，用云石膠來填縫，然后在涂刷一層木油，就可以有效的鎖住木材內部的水分，從而減少開裂變形等現象的出現。

After the anticorrosive wood products are made, the wood oil shall be painted in time to keep the moisture. In the later maintenance, especially for outdoor anti-corrosion wood products, they are more likely to suffer from wind blowing, sun and rain all year round, which makes it easier to crack and deform. This requires our observation and timely maintenance at any time. When cracking problems occur, the joints are filled with marble glue, and then a layer of wood oil is applied to effectively lock the moisture inside the wood, thus reducing the water content in the wood The appearance of cracking and deformation.

雖然處理后的木材可以防菌、防霉變及白蟻侵蝕，但我們仍然推薦您在工程完工后，待木材干燥或風干后在其表面上使用木材防護漆進行涂刷。使用戶外木材專用漆時應注意首先要充分搖勻，涂飾后需24小時的晴天條件，使涂料在木材表面成膜。

Although treated wood can prevent bacteria, mildew and termite erosion, we still recommend that you apply wood protective paint on the surface after the completion of the project after the wood is dry or air dried. When using the special paint for outdoor wood, it should be noted that it should be shaken well first. After finishing, it takes 24 hours of sunny weather to make the coating film on the wood surface.

總而言之，防腐木制品開裂都是由于內外水分不平衡導致的，所以能平衡木材內外水分的方法都能對木材開裂起到很好的延緩效果。所以，在防腐木制品帶給大家舒適與溫暖的時候，不要忘了去維護它，延長它的壽命，不要嫌工序繁瑣，為了避免之后的麻煩以及享受好的體驗，那就在前期多下點功夫吧

In a word, the cracking of anticorrosive wood products is caused by the imbalance of internal and external moisture, so the method of balancing the moisture inside and outside of wood can delay the cracking of wood. Therefore, when the anti-corrosion wood products bring comfort and warmth to you, don't forget to maintain it, prolong its life, and do not think of the complicated process. In order to avoid the trouble and enjoy the good experience, then put more effort in the early stage
關鍵詞：濟南防腐木